By brandElfatek · Turkey
Sole Agent in Egypt The Elfatek RIO-AC1 is an external digital display and load control indicator in one unit. It measures the signal from a load cell with high precision, shows it on a 6-digit LED display and gives a warning when the lifted load exceeds the crane capacity, so the lift does not continue – helping to prevent accidents and material damage.
All parameters are set with the remote control, so nobody has to climb to the device; they can also be changed via CANOpen. Through the CAN line it can set the parameters of an Elfatek rope angle limit sensor connected to the same line, and it can work with other control units over CANBus.
- 1 load cell input, 3 NO 10 A relays with adjustable positions
- 6-digit 7-segment LED display, 100 mm red digits, readable from 50 m indoors
- RS232 and CANBus communication
TMA supplies Elfatek crane safety equipment in Egypt as Elfatek’s agent, with selection, installation, calibration, spare parts and after-sales support from our crane engineers.
Key specifications
| Model | RIO-AC1 |
|---|---|
| Control | Parameter setting with remote control (also via CANOpen) |
| Sensor input | 1 load cell |
| Relays | 3 × NO contact, 10 A, adjustable positions |
| Display | 6-digit 7-segment red LED, 100 mm digits |
| Reading distance | up to 50 m indoors |
| Supply voltage | 85–265 VAC / 24–36 VDC (optional) |
| Remote control supply | 2 × AA alkaline batteries |
| Max. power consumption | 2.5–5 W (no load – full load) |
| Dimensions (W × D × H) | 715 × 154 × 98 mm |
| Weight | 3250 g display panel, 135 g remote control |
| Communication | RS232 and CANBus |
| Operating and storage temperature | −20 °C to +45 °C (optional −40 °C to +85 °C) |
Main figures from the manufacturer. Ask our team for the exact model and options for your application.